Small Damascus Recurve Folding Pocket Knife — Liner Lock, Rosewood & Olive Wood Handle, Brass Bolster & Brass Thumb Stud

This Damascus recurve folding pocket knife opens to 7 inches overall with a 3-inch blade and a 4-inch handle. The blade is forged from Damascus steel in a wave pattern finish. The handle pairs a dark rosewood upper scale with a warm olive wood lower scale. A wide brass bolster sits at the blade end. Brass pins and a mosaic cross pin lock the scales to the liner. A brass thumb stud opens the blade. The liner lock holds the blade rigid during use. No sheath included.

This is the only Damascus recurve folding pocket knife at JW Steel Crafts with a rosewood and olive wood handle combination and brass bolster in this compact liner lock configuration.

The History Behind This Blade

Compact recurve folding knives became the preferred daily carry blade for American frontiersmen and traveling craftsmen throughout the 19th century — small enough for a coat pocket, strong enough for field cutting tasks. Pairing two contrasting wood scales on a single handle was a signature technique of working knife makers who wanted both grip performance and visual distinction in one compact build. The JW Steel Crafts Damascus rosewood olive wood folder carries that same compact field carry tradition in every forged blade.

Blade Performance

The blade is forged from Damascus steel in a wave pattern finish. The recurve profile curves inward at mid-blade, then sweeps forward to the tip — increasing slicing efficiency on forward cutting strokes and giving the tip controlled piercing geometry for detail field tasks. Damascus steel holds a sharp working edge through sustained daily carry and cutting use. The wide brass bolster adds front-end weight for better cutting balance and protects the handle joint during heavy use. The brass thumb stud allows fast one-hand deployment from a closed position.

Handle Construction

The handle pairs dark rosewood on the upper scale and warm olive wood on the lower scale. Rosewood is dense and moisture-resistant through daily outdoor carry. Olive wood is close-grained with natural oils that resist moisture without regular conditioning. The two wood tones give the handle a layered, contrasting appearance — no two handles look identical due to natural wood grain variation. A wide brass bolster at the blade end adds visual weight and front balance. Brass pins and a mosaic cross pin lock every scale firmly to the liner. The liner lock engages automatically on blade opening and holds the blade rigid until manually released.

Best Used For

• Everyday carry cutting and compact field utility tasks
• Outdoor, camping, and trail use requiring a small fixed folder
• Collectors of Damascus recurve and two-tone wood handle folding knives
• Gifting for EDC users, outdoor enthusiasts, and Damascus knife collectors

Specifications

Frequently Asked Questions

What makes this knife different from other Damascus folding knives at JW Steel Crafts?
Only Damascus recurve folder in the store with a rosewood and olive wood two-tone handle and wide brass bolster in a compact liner lock build.

What is the difference between this and the Damascus hawkbill pruning folder?
This knife has a recurve clip point blade for forward slicing and piercing tasks. The hawkbill pruning folder curves sharply downward for pull cutting through vines and cord.

What is a liner lock?
A steel liner inside the handle locks the blade rigid automatically on opening and releases manually for safe closing.

What are the two wood types on the handle?
Dark rosewood on the upper scale and warm olive wood on the lower scale — both dense, moisture-resistant hardwoods with contrasting natural grain tones.

Is this knife suitable as a gift?
Yes. Damascus wave pattern blade, rosewood olive wood handle, brass bolster, and mosaic pin make this a strong gift for EDC users and outdoor knife collectors.

How do I care for this knife?
Wipe blade dry after use. Apply light oil to the pivot occasionally. Store in a dry place away from moisture.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.