7-Piece Damascus Kitchen Knife Set — Bread, Nakiri, Chef, Santoku, Utility, Boning & Paring with Rosewood Handles & Wood Spacer
- In stock, ready to ship
- Backordered, shipping soon
Secure checkout Encrypted payments
Free Shipping
On all orders over $100
Fast US Shipping
Orders ship within 1-2 days
30 Day Returns
No questions asked
Built to Last
Trusted by real craftsmen
This Damascus set gives you seven purpose-built knives for complete daily prep. Blade sizes run from 7 inches on the paring knife to 13 inches on the bread knife. Every blade is forged from layered Damascus steel in a flowing wave pattern. Every handle is shaped from rosewood with a wood spacer between the sections and brass pins. No bolster sits between blade and handle. No storage is included.
This is the only 7-piece Damascus kitchen set at JW Steel Crafts with rosewood handles, a wood spacer, and a Bread, Nakiri, Chef, Santoku, Utility, Boning, and Paring configuration.
The History Behind This Blade
The seven-knife kitchen system grew out of professional European cooking, where each blade had one job and no two overlapped. A bread knife handled crusted loaves, a chef knife led daily prep, and a nakiri and santoku covered vegetable work. A boning knife trimmed meat around bone, while utility and paring knives finished mid-size and detail tasks.
Rosewood became the handle wood of choice in working kitchens because its dense, tight grain resisted moisture without swelling or cracking. The wood spacer between sections marked premium custom craft. The JW Steel Crafts rosewood Damascus set carries that full seven-blade tradition in every forged blade.
What Is Inside the Set
- Bread Knife: Serrated edge for clean cuts through crusted loaves, largest at 13 inches
- Nakiri: Straight flat edge for precise vegetable chopping
- Chef Knife: Primary slicing, chopping, and daily prep
- Santoku: Flat edge for push cuts and controlled slicing
- Utility Knife: Mid-size trimming and portioning
- Boning Knife: Curved blade for trimming and working around bone
- Paring Knife: Peeling, scoring, and detail work, smallest at 7 inches
Blade Performance
Every blade is forged from layered Damascus steel in a flowing wave pattern. The layered structure builds consistent edge retention and cutting strength through daily use. Damascus holds a working edge longer than standard stainless under the same load. The pattern varies naturally across every blade — no two are identical. Full tang construction runs through every handle and spreads weight evenly from tip to base for stable cutting.
Handle Construction
Every handle is shaped from rosewood, a dense, tight-grained wood that resists moisture and holds its deep reddish-brown finish through daily use. A wood spacer sits between the sections, adding layered depth and reinforcing the joint. Brass pins lock every handle to the full tang for long-term reliability. No bolster sits between blade and handle, giving each knife a clean, lightweight profile. Natural grain variation means no two handles look alike.
Best Used For
- Complete daily prep from bread slicing to fine paring and boning
- Professional chef and serious home kitchen use
- Collectors of matched Damascus rosewood sets
- High-volume meal prep needing full seven-blade coverage
- Gifting for home cooks, chefs, and Damascus enthusiasts
Specifications
| Feature | Details |
|---|---|
| Quantity | 7 knives |
| Largest Blade | 13 inches (Bread Knife) |
| Smallest Blade | 7 inches (Paring Knife) |
| Blade Material | Flowing wave pattern Damascus steel |
| Handle Material | Rosewood |
| Handle Detail | Wood spacer between sections |
| Pin Detail | Brass pins |
| Bolster | None |
| Construction | Full tang |
| Storage | Not included |
Frequently Asked Questions
What makes this set different from the other Damascus rosewood sets?
It is the only 7-piece rosewood set with a bread knife and curved boning knife. The 5-piece rosewood set has neither, and the 3-piece ships in a leather roll.
Why include both a bread knife and a boning knife?
The bread knife saws through hard crust cleanly. The boning knife trims around bone where wider blades cannot reach.
What is the wood spacer on each handle?
A natural wood strip between the sections that adds depth and reinforces the joint.
What is the Nakiri knife for?
Vegetable work: precise flat chopping and clean push cuts through dense produce.
Are all seven knives full tang?
Yes. The tang runs the full length of every handle for strength and durability.
Does this set include storage?
No. Use a magnetic strip, block, or roll; never store loose in a drawer.
How do I care for Damascus blades?
Hand wash and dry after use, oil occasionally, and never use a dishwasher.
Product Care for JW SteelCrafts Hand-Forged Products
To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:
- Regular Cleaning
Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish. - Dry Thoroughly
After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture. - Proper Storage
Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials. - Avoid Impact
While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece. - Edge Maintenance (For Knives & Swords)
Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity. - Routine Inspection
Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.
By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.
Need product help? Chat with our Customer Support Representative now