Gravemoor Damascus Double Axe 8" Handmade Viking Style Twin Edge Head

A double bit head with matching curved edges on both sides solves a scheduling problem more than a technical one, you don't have to stop mid-project to resharpen when one side dulls, you just flip the head. The Gravemoor Damascus Double Axe builds on that same practical logic, with both edges cut to the same curved profile rather than one fine and one rough, so either side performs identically.

Because both edges share the same 4-inch curve, the head balances more evenly during a swing than a mismatched double-bit design would, which matters more than most builders expect once the handle is mounted and the axe is actually in use.

Introduction

If you don't want to choose between edge styles on a double-bit build, the Gravemoor Damascus Double Axe sidesteps that decision entirely by giving you two identical curved edges. At 8 inches overall with 4 inches of cutting edge on each side, it's sized for real chopping work once mounted, not just display. The dual-curved profile mirrors traditional Viking double-axe geometry rather than a modern double-bit hatchet shape.

This head arrives as a blank, so you control the final handle length, material, and mounting angle, useful if you're matching it to a specific historical reenactment build or a personal bushcraft project.

Gravemoor Damascus Double Axe Blade

At 5 to 6mm thick, the head holds enough mass to swing with real force without becoming unwieldy once handled. Both curved edges are ground identically, which matters for balance, an axe with mismatched bit shapes will pull slightly to one side during a swing, something you won't get with this symmetrical build. The acid-etched finish shows the Damascus pattern clearly on both faces, useful if you want the grain visible from either side once mounted.

Uses and Safety

This head suits Viking-style double-axe builds, bushcraft projects where resharpening mid-task isn't practical, and display pieces for historical collections. Mount it securely and test with light strikes before committing to full swings, since a loose head is the most common failure point in a fresh custom build. Keep the head dry in storage, as unmounted Damascus will develop surface rust faster than you'd expect.

Specifications

• Length: 8 inches

• Blade Edge: 4 inches each side

• Head Material: Damascus steel

• Thickness: 5 to 6mm

• Type: Double bit axe head blank

• Style: Viking double axe

• Blade Finish: Acid-etched Damascus pattern

• Blade Profile: Dual curved cutting edges

• Cutting Edge: Plain edge

FAQs

Q: Why have two identical curved edges instead of one straight and one curved? 

Matching edges keep the head balanced during a swing, a mismatched double-bit head can pull slightly to one side, which this symmetrical design avoids.

Q: What's the actual advantage of flipping the head instead of resharpening? 

It lets you keep working without stopping mid-task, since you switch to the fresh edge instead of pausing to sharpen the one you've been using.

Q: Does the curved profile change how it cuts compared to a straight double-bit? 

Yes, curved edges concentrate force differently across the swing, generally offering more controlled cuts than a flat, straight-edge double-bit.

Q: Is 5 to 6mm thick enough for real chopping once mounted? 

Yes, this thickness holds up to repeated heavy use while staying light enough that the head doesn't feel front-heavy during a swing.

Q: Is this a good gift for someone building a Viking reenactment kit? 

Yes, its historically accurate double axe geometry makes it a strong choice for reenactors finishing their own period-appropriate build.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.