Carbon Steel Clip Point Bowie Knife — Black Resin Handle, Steel Guard, Steel Pommel & Mirror Polished Blade

This Bowie knife measures about 9.5 inches overall with a 5.5-inch clip point blade and a 4-inch black resin handle. The blade is forged from carbon steel and finished to a bright mirror polish, with an oval cutout on the flat and a steel guard at the base. A steel pommel caps the handle, and white spacer rings sit between the guard and the resin scales. A black leather sheath with a snap closure is included for belt carry.

This is the only carbon steel mirror-polished clip-point Bowie knife at JW Steel Crafts with a black resin handle, steel guard, and steel pommel in this configuration.

The History Behind This Blade

The Bowie knife traces back to the American frontier of the 1830s, named for the frontiersman whose large clip point blade became famous across the country. The clip point — where the spine drops in a concave curve toward the tip — gave the design a fine, controlled point for detail work alongside a deep belly for slicing. Carbon steel was the frontier blade material of choice because it took a keen edge and held it through hard field use. A steel guard protected the hand, and a steel pommel balanced the blade and capped the handle. The JW Steel Crafts clip point Bowie carries that frontier tradition in every forged blade.

Blade Performance

The blade is forged from carbon steel and finished to a bright mirror polish. Carbon steel takes a keener edge than standard stainless and holds it longer through repeated field and outdoor use, rewarding simple care with strong cutting performance. The clip point profile drops the spine in a concave curve toward the tip, giving you a fine, controlled point for detail work alongside a deep belly for long slicing strokes. An oval cutout sits on the blade flat as a design detail. Full tang construction runs into the handle for strength and balance.

Handle, Guard and Pommel

The handle is shaped from black resin — a fully waterproof material that does not absorb moisture, swell, or crack, and holds its smooth finish through outdoor use. A steel guard sits between the blade and handle, protecting the hand and giving a secure stop during cutting. White spacer rings add contrast between the guard and the resin. A steel pommel caps the base, adding rear weight that balances the blade and finishes the frontier profile.

Leather Sheath

The black leather sheath holds the blade securely with a snap closure and fits on a belt for field carry. The thick leather protects the edge during storage and allows quick access outdoors.

Best Used For

• Hunting, field dressing, and outdoor utility cutting

• Camping and bushcraft carry with a classic clip point blade

• Collectors of carbon steel Bowie knives

• Display pieces with full working outdoor capability

• Gifting for hunters, outdoorsmen, and Bowie collectors

Specifications

Frequently Asked Questions

What is a clip point blade?

The spine curves down to the tip in a concave clip, giving a fine point for detail work and a deep belly for slicing.

What does the steel guard do?

It protects the hand and stops the fingers from sliding forward during cutting.

What is the steel pommel for?

It caps the handle and adds rear weight that balances the blade.

Is the leather sheath included?

Yes. The black leather sheath with a snap closure is included for belt carry.

Is this knife full tang?

Yes. The tang runs into the handle for strength and balance.

How do I care for a carbon steel blade?

Wipe it dry after use, oil it occasionally, and store it in a dry place.

Is this knife a good gift?

Yes. The mirror-polished clip-point blade, black resin handle, and leather sheath make it a strong gift for hunters and collectors.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.