Damascus Tri-Hole Tomahawk with Skeletonized Forged Head

Three holes run clean through the middle of this head. Aircraft builders have used that trick for a century. So have race car engineers, bridge designers, and bicycle frame makers. Remove metal where no load travels, and the part gets lighter. It loses nothing it actually needed in the first place. The Damascus Tri-Hole Tomahawk applies that thinking to forged steel. Weight comes out of the middle, and the edge keeps everything.

A lighter head moves faster through the swing. Speed does more work at the edge than raw mass ever will. The holes also shift balance toward the cutting edge. That forward bias is what makes a compact axe truly bite. Balance beats brute weight every time. Damascus grain wraps every hole and flows across the head. Cutting holes through a forged pattern takes real nerve. One slip ruins the whole head.

JW SteelCrafts forges and finishes each piece by hand. Secure checkout and tracked shipping cover every order. Grain differs on every head, so no two ever match. Small batches close quickly and never return.

Damascus Tri-Hole Tomahawk at JW SteelCrafts with three cut holes through the head, rosewood scales, and full tang construction.

The History Behind This Damascus Tri-Hole Tomahawk

Skeletonized tools grew from the search for lighter, faster gear. Smiths learned that a head can lose mass without losing bite. Damascus layering added strength and visible grain to that idea. JW SteelCrafts brings both traditions into one compact outdoor tool.

Head Performance

The curved bit drives clean into wood on every strike. Less head weight means the swing stays quick and accurate. Layered Damascus takes a keen edge and holds it. The flat poll opposite the bit drives tent stakes and wedges. That saves carrying a separate hammer to camp. Full tang steel carries shock straight through the handle. Nothing flexes, because there is no joint to flex. Touch the edge up on a fine stone when it slows. Wipe the head dry after every session outdoors. Light oil protects the grain and the cut hole edges. Never store the tomahawk while the steel is damp.

Handle Construction

Rosewood scales pin directly to the exposed steel tang. Steel pins lock those scales through the full thickness of the handle. Scales cannot shift because the tang carries the load. Rosewood is dense and naturally oily, so moisture stays out. The warm red grain contrasts sharply against the dark etched steel. Bare wood keeps the feedback honest in your hand. The handle tapers gently to fill your palm during work. A hand-stitched leather sheath guards the bit in storage. Feed the rosewood with oil once or twice a season.

Best Used For

This tomahawk suits campers, bushcrafters, and collectors of clever design work. It splits kindling, drives stakes, and shapes wood at camp. It also gifts well for outdoorsmen who appreciate real engineering. Anyone who notices how things are built will study this head. Order the Damascus Tri-Hole Tomahawk today. Every head is individually forged, so the grain never repeats.

Specifications

FAQ's

How is this different from your Damascus Full Tang camping Hatchet?

That model uses black scales and a solid bearded head. This one has three cut holes and rosewood scales.

What are the three holes for?

They remove weight where no cutting happens. The head stays light, and the balance shifts forward.

Is this really full tang?

Yes. The steel runs the whole handle length. Scales pin to the sides, so nothing loosens.

Does it come with a sheath?

Yes. A hand-stitched leather sheath ships with every tomahawk.

How do I care for the rosewood scales?

Wipe them dry after use. Feed the wood with oil twice a season.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.