Damascus Bearded Spike Tomahawk with Forged Spike Poll

An edge pushes wood apart. A spike goes straight into whatever an edge slides off. Those are two opposite jobs on opposite ends of one single head. A damascus bearded Spike Tomahawk carries both of them at once. The bearded bit handles kindling, shaping, and general camp timber. The hardened spike poll behind it handles absolutely everything else. Frozen ground, packed bark, stubborn stakes, seized joints. All the jobs that ruin a good cutting edge.

Most of the axes in our racks do one single thing well. This one simply refuses to choose between them. Flip your wrist over, and the tool changes character completely. That versatility is exactly why spike polls survived so long. Fewer items riding in the pack, and more jobs properly covered. One head, two answers, and no compromise between them. Your pack gets lighter by one item.

JW SteelCrafts forges and finishes each piece by hand. Secure checkout and tracked shipping cover every order. Damascus figure shifts head to head, so none ever match. Small batches close quickly and never return.

Damascus bearded Spike Tomahawk at JW SteelCrafts with a spike poll, a carved rosewood haft, and a tooled leather sheath.

The History Behind This Damascus bearded Spike Tomahawk

Spike polls served woodsmen and travellers across many centuries. A point could pry, pull, and break where an edge failed. Layered steel gave those heads strength and visible grain. JW SteelCrafts joins both traditions in one historically inspired outdoor tool.

Head Performance

The bearded bit hangs the cutting edge below the eye. That drop stretches the cut without adding head weight. Choke up beneath the beard for carving and notching. Drop back on the haft for splitting kindling. The spike tapers back to a fine, hardened working point. Use that point to pry bark, set stakes, and break frozen wood. Layered Damascus takes a keen edge and holds it. Touch both ends up on a fine stone as needed. Wipe the whole head dry after every session. Light oil protects the grain across bit and spike alike. The point deserves the same care as the edge.

Haft Construction

The haft is rosewood, carved to follow its natural shape. Knots and natural curves stay visible rather than turned away. Rosewood is dense and naturally oily, so moisture stays out. That length gives you leverage while the curve holds your control. Bare wood keeps the feedback honest in your palm. The socketed eye seats the head firmly on the shaft. A tooled leather sheath wraps the bit for safe storage and carry. Stamped circles and a snap strap finish it by hand. Feed the rosewood with oil once or twice a season.

Best Used For

This tomahawk suits campers, bushcrafters, and cold weather trips equally. It splits, shapes, pries, and travels well in one single package. It also gifts well for outdoorsmen and Damascus collectors alike. Winter campers appreciate a spike more than most. Order the Damascus bearded Spike Tomahawk today. Every head is individually forged, so your figure never repeats.

Specifications

FAQ's

Does this axe really have a spike?

Yes. A hardened point extends from the poll behind the bit. Not every tomahawk in our range carries one.

What is the spike used for?

Prying bark, setting stakes, and breaking frozen wood. It reaches where an edge cannot.

Is this full tang?

No. The head is socketed and seats onto the haft. Our Tri-Hole model is the full tang option.

Is a sheath included?

Yes. A tooled leather sheath with a snap strap ships with every piece.

How do I care for the head?

Wipe it dry after use and apply light oil. Never store it damp inside the sheath.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.