2-Piece Damascus Hawkbill Folding Pocket Knives — Liner Lock, Rosewood Black & Cream Resin Handles, Brass Bolsters

This set includes two Damascus hawkbill folding pocket knives, each opening to 7 inches overall with a 3-inch blade and a 4-inch handle. Both blades are forged from Damascus steel in a wave pattern finish. Knife one carries a black resin upper scale with dark rosewood lower scale. Knife two carries a cream resin upper scale with dark rosewood lower scale. Both knives share brass bolsters, brass pins, brass thumb studs, and a liner lock mechanism. No sheath included.

This is the only set of 2 Damascus hawkbill folding knives at JW Steel Crafts with black resin rosewood and cream resin rosewood handle combinations in a liner lock configuration.

The History Behind This Blade

Hawkbill blade folders were carried by sailors, riggers, and field workers across the 19th-century American frontier for their ability to cut rope, cord, and material on a downward pull stroke where a straight blade would slip. Paired knife sets became a practical tradition among working outdoorsmen who needed matching tools for two users on the same camp or hunt. Damascus steel brought layered pattern-welded strength into compact folding formats built for sustained daily carry. The JW Steel Crafts Damascus hawkbill pair carries that same working tradition in both knives.

Blade Performance

Both blades are forged from Damascus steel in a wave pattern finish. The hawkbill profile curves sharply downward from spine to tip — built for pull cutting tasks where a straight or clip point blade loses control. The curved tip pulls through rope, cord, webbing, and material cleanly on a single downward stroke. Damascus steel holds a sharp working edge through daily carry and cutting use. The brass thumb stud on each knife allows fast one-hand deployment from a closed position.

Handle Construction

Each handle pairs two distinct scale materials above and below the centerline. Knife one uses black resin on the upper scale and dark rosewood on the lower scale. Knife two uses cream resin on the upper scale and dark rosewood on the lower scale. Rosewood is dense and moisture-resistant through daily outdoor carry. Brass bolsters sit at the blade end of each handle, adding front-end weight and protecting the handle joint. Brass pins lock every scale firmly to the liner. The liner lock on each knife engages automatically on blade opening and holds the blade rigid during cutting until manually released.

Best Used For

• Everyday carry cutting, cord, and utility tasks
• Paired carry or gifting for two users in one purchase
• Hunting, camping, and outdoor field use
• Collectors of Damascus hawkbill and matched pair folding knives
• Gifting for EDC users, hunters, and Damascus knife collectors

Specifications

Frequently Asked Questions

What makes this set different from other folding knives at JW Steel Crafts?
Only paired 2-knife Damascus hawkbill set in the store — black resin rosewood and cream resin rosewood handles together in one liner lock configuration.

What is a hawkbill blade profile?
The blade curves sharply downward to the tip — built for pull cutting through rope, cord, and material where a straight blade loses grip.

What is a liner lock?
A steel liner inside the handle engages automatically when the blade opens, locking it rigid for safe cutting until manually pushed aside to close.

Are both knives identical in size?
Yes. Both open to 7 inches with a 3-inch blade and 4-inch handle — only the handle scale colors differ between the two knives.

Is this set suitable as a gift?
Yes. Two matched Damascus hawkbill folders in contrasting handle colors make a strong gift for EDC users, knife collectors, and outdoor enthusiasts.

How do I care for these knives?
Wipe blades dry after use. Apply light oil to pivot points occasionally. Store in a dry place away from moisture.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.