7-Piece Full Tang Damascus Gyuto Knife Set with Olive Wood Handles
- Low stock - 7 items left
- Backordered, shipping soon
Secure checkout Encrypted payments
Free Shipping
On all orders over $100
Fast US Shipping
Orders ship within 1-2 days
30 Day Returns
No questions asked
Built to Last
Trusted by real craftsmen
This 4-piece Damascus knife set combines Bunka, Gyuto, Utility, and Paring blades with full tang construction and polished bone handles.
This Damascus Gyuto knife set puts seven hand-forged blades in your hand at once. Pull any blade from the set. The first thing you notice is the flowing pattern rippling down the flat. The olive wood handle warms your palm. The edge is already there.
The Blade
Each blade is hand-forged from layered Damascus steel. The forge-welded layers create the visible flowing pattern across the flat of each knife. That same layered structure improves blade toughness and holds a working edge longer than single-stock steel. Every edge leaves the forge precision-ground and ready to cut from day one.
The Handle
Olive wood fills the center of each handle. The grain runs warm, with amber and brown tones that shift under light. Black resin bolsters anchor both ends and seal the wood against moisture. Metal pins lock the scales to the full tang beneath. Bare-handed or gloved, the handle sits solid without sticky grip texturing.
The Build
Every knife in this set runs full tang from blade tip to handle end. The steel extends through the entire handle, pinned and sealed. Full tang construction moves the balance point close to the bolster rather than out on the tip. For a knife used through a full prep session, that matters more than blade weight alone.
Real-World Use
The Gyuto in this set is built for a cutting board, not a display case. Use the long blade to break down a brisket, slice grilled chicken, or work through dense vegetables. The progressively smaller blades in the set handle trimming, peeling, and detail work. A home cook prepping a full holiday dinner has the right blade for every task without switching sets. Hand-forged Damascus steel takes and holds an edge that machine-stamped blades cannot match at this geometry.
The JW Difference
JW SteelCrafts hand-forges every knife in Texas. Each piece carries a one-of-a-kind Damascus pattern because no two forge welds produce the same lines. Five verified buyers rated this set five stars. Orders ship from the USA within 1 to 2 business days.
Specs
|
Specification |
Detail |
|
Blade Steel |
Damascus steel (layered) |
|
Handle Material |
Olive wood with black resin bolsters |
|
Tang |
Full tang |
|
Includes |
7-piece Damascus knife set |
|
Ships From |
USA |
|
Made By |
JW SteelCrafts |
Who Is This For
-
The home cook who runs daily dinner prep and wants one set that covers every task from fresh vegetables to bone-in protein without reaching for a second knife.
-
The backyard pitmaster who needs a dedicated Gyuto for carving brisket and slicing ribs clean at the cutting board.
-
The collector who wants a Damascus set that actually gets used, not locked in a display case.
-
The gift buyer who wants a handcrafted knife set that arrives presentation-ready and stands on its own.
How to Use It
Hold the Gyuto in a pinch grip: thumb and index finger on the blade, just ahead of the bolster. Keep your wrist straight on the push stroke. Let the weight of the blade do the work on soft vegetables. For protein, use the full length of the edge in a single draw stroke rather than a rocking chop. Start with light cuts until you feel the balance point. This blade sits more forward than a western chef knife.
How to Care for It
After Every Use
-
Hand wash with mild soap and warm water.
-
Dry immediately with a clean cloth.
-
Never run through the dishwasher; heat and moisture cycles damage the Damascus layers and the olive wood scales.
Every Few Weeks
-
Apply a thin coat of food-safe mineral oil to the blade.
-
Wipe off any excess before storing.
Storage
-
Store in a knife block, on a magnetic strip, or in a protective sleeve.
-
Keep away from prolonged humidity to protect the olive wood handles.
Sharpening
-
Use a fine whetstone or ceramic rod; maintain the original factory bevel angle.
-
Finish with a leather strop after each session to realign the edge.
-
Avoid electric sharpeners with fixed-angle carbide slots; they remove too much steel and damage the Damascus pattern.
FAQs
What knives are included in this 7-piece Damascus set?
The set includes seven Damascus blades graduating from a full-size Gyuto chef knife down to a short paring-length blade. Contact JW SteelCrafts at jwsteelcrafts.com for the complete knife-by-knife breakdown before ordering.
What steel is used in these blades?
Each blade is hand-forged from layered Damascus steel. The forge-welded layers create the visible flowing pattern and improve toughness over single-stock steel. Specific layer count and HRC values are not published for this set.
Do the olive wood handles hold up in a working kitchen?
Yes. Olive wood is a dense, tight-grained hardwood with low porosity. Black resin bolsters seal both ends of the handle against moisture. Hand wash and dry immediately after each use and the handles stay stable for years.
Does this set come with a sheath or storage case?
No sheath or storage case is listed for this set. Store the knives on a magnetic strip, in a knife block, or in individual protective sleeves to protect the edges and the olive wood handles.
Is this set legal to own in the United States?
Yes. Chef knife sets are legal to own across all 50 states. Check local laws for any carry restrictions outside the home.
How do I sharpen a Damascus steel blade?
Use a whetstone starting at 1000 grit, then finish at 3000 to 6000 grit. Keep the blade at the original bevel angle throughout. Finish with a leather strop to realign the edge. Avoid electric sharpeners with carbide slots; they strip too much steel and damage the pattern.
Can I get this set engraved or customized?
Contact JW SteelCrafts directly at jwsteelcrafts.com to ask about customization options. Custom requests may affect lead time.
How long will this knife set last?
Damascus steel blades maintained with regular oiling and proper sharpening hold their edge and pattern for decades. Full tang construction eliminates handle failure at the stress point. Treat them right and these knives outlast the cook.
Gift
This 7-piece Damascus Gyuto knife set is a standout choice for Father's Day, Christmas, a retirement gift, or a groomsman set. The olive wood grain and Damascus pattern make every knife visually distinct without looking purely decorative. It ships presentation-ready and no extra wrapping is needed.
Explore More
Explore additional handcrafted knife collections including the Damascus Chef Knife Set Collection, 4 Piece Damascus Kitchen Knife Set, Professional Damascus Chef Knife Set, Hand-Forged Damascus Chef Knife, Custom Damascus Kitchen Knife.
Add this 7-piece Damascus Gyuto knife set to your cart today and have it shipped from Texas within two business days.
Product Care for JW SteelCrafts Hand-Forged Products
To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:
- Regular Cleaning
Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish. - Dry Thoroughly
After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture. - Proper Storage
Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials. - Avoid Impact
While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece. - Edge Maintenance (For Knives & Swords)
Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity. - Routine Inspection
Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.
By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.
Need product help? Chat with our Customer Support Representative now