Forged 6-Piece Damascus Carving and Slicer Knife Set with Long Damascus Blades, Black Resin Handles

This Damascus carving and slicer knife set has five knives. The largest is a 13-inch slicer. The set steps down through four graduating sizes to a 9-inch carving knife. Every blade is forged from Damascus steel with a bold flowing water and ladder pattern. All five are long narrow slicer profiles built for clean meat cuts without tearing. Each handle is solid black resin with a smooth finish. A silver bolster sits at the blade end. One round silver mosaic pin locks the scales on each handle. Full tang runs through every piece. No sheath included.

This is the only Damascus carving and slicer knife set at JW Steel Crafts with five long narrow Damascus blades, black resin handles, and silver bolsters across a full 13 to 9-inch graduating size range.

The History Behind This Blade

Long narrow carving and slicer knives became standard in professional butcher and BBQ kitchens where clean thin cuts on large meat portions required a blade that could travel the full length of a roast or brisket in one stroke. Damascus steel was adopted on carving knives for its layered grain structure that holds a fine slicing edge longer than single-steel alternatives under repeated meat cutting. Black resin handles became the preferred material on professional slicer sets for their full moisture resistance and non-slip grip through wet kitchen and BBQ conditions. The JW Steel Crafts Damascus slicer set carries that professional carving tradition across all five blade sizes.

Blade Performance

Every blade is forged from Damascus steel with a bold flowing water and ladder pattern. All five are long, narrow slicer profiles. This shape travels the full length of brisket, roast, turkey, and large proteins in one clean forward stroke without tearing meat fibers. The 13-inch blade handles the longest cuts. Each smaller size steps down for more controlled carving on smaller portions and plating work. The high polish finish reduces drag during slicing. Damascus steel holds a fine slicing edge through repeated BBQ and kitchen carving sessions.

Handle Construction

Every handle is solid black resin with a smooth matte finish. Resin fully resists moisture, temperature changes, and grease through heavy BBQ and kitchen use without warping or cracking. The handle shape gives a firm grip during long slicing strokes. A silver bolster sits at the blade end of every knife and adds front balance behind the long blade. One round silver mosaic pin locks the scales firmly to the full tang on each handle. Full tang runs the full handle length on every piece for consistent balance across all five blade sizes.

Best Used For

• Brisket, roast, turkey, and large protein slicing

• BBQ and smokehouse carving and portioning

• Thin even meat cuts for plating and presentation

• Professional kitchens and serious home BBQ cooks

• Gifting for BBQ enthusiasts, chefs, and Damascus collectors

Specifications

Frequently Asked Questions

Why are all five blades the same narrow slicer profile?
Long narrow blades travel the full length of brisket and roast in one stroke no tearing, no dragging, clean cuts every time.

What is the difference between the 13-inch and 9-inch knives in this set?
The 13-inch handles full-length cuts on large proteins. The 9-inch gives more control on smaller portions and plating work.

Are black resin handles safe for BBQ and wet kitchen use?
Yes. Resin fully resists moisture, grease, and temperature changes without warping or losing grip through heavy use.

What does the silver mosaic pin do?
It locks the handle scales firmly to the full tang — one pin per handle keeps the build tight and stable.

Is this set suitable for brisket slicing?
Yes. The long narrow blade profile is built for brisket, roast, and smoked meat — clean cuts without tearing the fibers.

Is this set suitable as a gift?
Yes. Five matched Damascus slicer blades with black resin handles and silver bolsters make a strong gift for BBQ cooks and collectors.

How do I care for this set?
 Hand wash and dry after each use. Apply light oil to Damascus blades occasionally. Sharpen with a whetstone. Store in a dry place.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.