Ridgeline Damascus Steel Bar 20" Pair 1.5" Wide Pattern Welded Stock for Knife Blades and Tool Making

Some bladesmithing projects need more raw material than a single billet can provide, whether that's for multiple blades, a particularly large piece, or simply having backup stock on hand without reordering mid-project. The Ridgeline Damascus Steel Bar pair reflects that practical need, offering two 20-inch bars rather than a single shorter billet.

Pattern welded construction runs through the full length of each bar, meaning both pieces in this pair carry the same forged character despite being separate billets.

Introduction

If you need substantial working material across multiple pieces, the Ridgeline Damascus Steel Bar pair delivers two 20-inch bars at 1.5 inches wide each. This combination of length and quantity gives bladesmiths real flexibility, whether you're building multiple knives, one larger project, or simply want backup stock available. As a Damascus Steel Bar, each piece in the pair carries genuine pattern-welded structure through its full length.

This set suits makers working on serious multi-blade projects or those who prefer having ample material on hand rather than ordering separately for each build.

Ridgeline Damascus Steel Bar Blade

This Forged Damascus Bar pair includes two 20 inch bars at 1.5 inches wide, offering substantial combined length for knife blade and tool making. As Handcrafted Steel Bar stock, the pattern welded construction reflects the same folding tradition used in traditional Damascus bladesmithing, here supplied in generous quantity across two separate pieces. The Custom Damascus Steel structure remains consistent throughout both bars.

Uses and Safety

This pair is intended for knife blade making and general tool forging projects requiring substantial raw material. Since this is raw forging material, handle it according to standard bladesmithing safety practices during heating, drawing, and shaping. Store both bars in a dry place to prevent surface rust before your projects begin.

Specifications

• Set Includes: 2 bars

• Length: 20 inches each

• Width: 1.5 inches each

• Material: Damascus steel, pattern welded

• Form: Flat billet bar

• Type: Maker supply material for knife blades and tool making

FAQs

Q: Why does this listing include two bars instead of one? 

Having two 20-inch bars gives you substantial combined material for multiple blades, one larger project, or backup stock for future builds.

Q: Is 1.5 inches wide enough for standard knife blades? 

Yes, this width suits most standard blade profiles, giving you a practical starting shape to draw out into your finished design.

Q: Can I use both bars for the same knife project? 

Yes, though most makers use the pair across separate projects or as backup material, since 20 inches alone typically covers a single blade.

Q: Are these bars pre-shaped for a specific project? 

No, they arrive as flat raw billets, giving you full control over how you cut and draw each one into your finished blade or tool design.

Q: Is the Ridgeline Damascus Steel Bar pair good for gifting? 

Yes, its generous combined material makes it a practical gift for bladesmiths working on multiple projects or larger custom builds.

Product Care for JW SteelCrafts Hand-Forged Products

To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:

1. Regular Cleaning
   Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish.
2. Dry Thoroughly
   After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture.
3. Proper Storage
   Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials.
4. Avoid Impact
   While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece.
5. Edge Maintenance (For Knives & Swords)
   Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity.
6. Routine Inspection
   Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.

By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.