5-Piece Damascus Kitchen Knife Set — Butcher, Bread, Chef, Utility & Paring with Reddish Hardwood Handles
- Low stock - 3 items left
- Backordered, shipping soon
Secure checkout Encrypted payments
Free Shipping
On all orders over $100
Fast US Shipping
Orders ship within 1-2 days
30 Day Returns
No questions asked
Built to Last
Trusted by real craftsmen
This Damascus set gives you five purpose-built knives for complete daily prep. Blade sizes run from 7 inches on the paring knife to 12 inches on the bread knife. Every blade is forged from layered Damascus steel in a flowing wave pattern. Every handle is shaped from reddish hardwood with a steel bolster, a mosaic pin, and silver pins. A leather roll with brass buckles is included for protected storage and travel.
This is the only Damascus kitchen knife set at JW Steel Crafts with reddish hardwood handles, steel bolsters, and a Butcher, Bread, Chef, Utility, and Paring configuration in a leather roll.
The History Behind This Blade
This five-knife set was built around the two heaviest jobs a kitchen faces — breaking down meat and slicing crusted bread. A butcher knife handled the meat work, a bread knife sawed through hard loaves, and a chef, utility, and paring knife covered everything in between. Steel bolsters became standard on working butcher and chef knives because the extra front-end weight steadied heavy cuts and protected the hand. The reddish hardwood handle, set off by a mosaic pin, gave the set a warm, distinct look. The leather roll kept every blade protected and ready to travel. The JW Steel Crafts hardwood Damascus set carries that working tradition in every forged blade.
What Is Inside the Set
- Butcher Knife — Wide blade for meat breakdown and portioning
- Bread Knife — Serrated edge for clean cuts through crusted loaves, largest at 12 inches
- Chef Knife — Primary slicing, chopping, and daily prep
- Utility Knife — Mid-size trimming and portioning
- Paring Knife — Peeling, trimming, and detail work, smallest at 7 inches
Blade Performance
Every blade is forged from layered Damascus steel in a flowing wave pattern. The layered structure builds consistent edge retention and cutting strength through daily use. Damascus holds a working edge longer than standard stainless under the same load. The pattern varies naturally across every blade — no two are identical. Full tang construction runs through every handle and spreads weight evenly from tip to base for stable cutting.
Handle Construction
Every handle is shaped from reddish hardwood with a warm tone and tight grain that resists moisture and holds its finish through daily kitchen use. Natural variation means no two handles look alike. A steel bolster sits between blade and handle, adding front-end weight for better balance and protecting fingers during heavy cuts. A mosaic pin sits at the center of each handle as a decorative detail, and silver pins lock every handle to the full tang for long-term reliability.
Best Used For
- Complete daily prep from meat breakdown to bread slicing and fine paring
- Professional chef and serious home kitchen use
- Catering and travel prep using the leather roll carry system
- Collectors of Damascus hardwood kitchen sets
- Gifting for home cooks, chefs, and Damascus enthusiasts
Specifications
| Feature | Details |
|---|---|
| Quantity | 5 knives |
| Largest Blade | 12 inches (Bread Knife) |
| Smallest Blade | 7 inches (Paring Knife) |
| Blade Material | Flowing wave pattern Damascus steel |
| Handle Material | Reddish hardwood |
| Pin Detail | Mosaic pin and silver pins |
| Bolster | Steel bolster on each knife |
| Construction | Full tang |
| Storage | Leather roll with brass buckles |
Frequently Asked Questions
What makes this set different from the other Damascus roll sets at JW Steel Crafts?
This is the only roll set with reddish hardwood handles, steel bolsters, and a butcher knife. The ebony, black resin, and rosewood roll sets use different handles and knife lineups.
What is the butcher knife for? Its wide blade breaks down and portions meat, handling heavier cuts than a standard chef knife.
What does the steel bolster do?
It adds front-end weight for better balance and protects fingers during heavy chopping and slicing.
What is the mosaic pin on each handle?
A decorative pin with an inlaid pattern set at the center of each handle, alongside the silver pins.
Does the leather roll fit all five knives?
Yes. Each knife sits in its own slot, and the roll buckles closed for storage and travel.
Are all five knives full tang?
Yes. The tang runs the full length of every handle for strength and durability.
How do I care for Damascus blades?
Hand wash and dry after use, oil occasionally, and never use a dishwasher.
Is this set suitable as a gift?
Yes. The matched blades, hardwood handles, steel bolsters, and leather roll make it a strong gift for cooks and collectors.
Product Care for JW SteelCrafts Hand-Forged Products
To ensure the longevity and beauty of your hand-forged JW SteelCrafts products, follow these essential care instructions:
- Regular Cleaning
Wipe your knives, swords, axes, and rings with a soft cloth to remove dust and debris. For deeper cleaning, use a mild soap solution and a non-abrasive cloth. Avoid using harsh chemicals or abrasives that could damage the steel’s finish. - Dry Thoroughly
After cleaning, ensure your product is completely dried. This helps prevent water spots, rust, or corrosion, particularly on blades and steel surfaces exposed to moisture. - Proper Storage
Store your hand-forged products in a dry, cool place to prevent oxidation or rust. For long-term storage, consider applying a thin layer of oil (e.g., mineral oil or gun oil) to the metal surfaces, or using a rust inhibitor. When storing knives and swords, keep them in protective sheaths or pouches to prevent contact with other materials. - Avoid Impact
While designed for strength and durability, avoid dropping or striking your steel products against hard surfaces. This can cause damage to the blade, edge, or overall integrity of the piece. - Edge Maintenance (For Knives & Swords)
Periodically sharpen the blades to maintain their cutting edge. Use a proper sharpening stone or take your product to a professional for maintenance. Always sharpen in the correct direction to preserve the blade’s integrity. - Routine Inspection
Regularly inspect your products for any signs of wear, rust, or damage. If you notice any issues, reach out to us for maintenance, restoration, or repair services.
By following these care instructions, your JW SteelCrafts products will retain their craftsmanship, functionality, and beauty for years to come.
Need product help? Chat with our Customer Support Representative now